We recommend you to buy ESSL x990 or K30 if you wish to mark the attendance of your clients using thumb or RFID and delete clients whose membership is expired.
You can have one or more devices.
The device can be purchased from your local vendor. We don't sell devices directly or in-directly
It will be the task of your biometric vendor to install the device and ping it in the local network on which your computer is installed.
Generally, device is connected with wire or wifi to your internet router and your computer is connected to your same router.
The primary thing to make sure is that your device is "PINGED" with your computer. And this is the duty of your biometric vendor.
Search Knowledge Base Articles
Which biometric to install
Did you find this article useful?
Related Articles
-
How to check biometric device is piniging or check communication between device and computer
Go to start > Open RUN > Type "CMD" > Hit enter > Black window will open and type ping [IP of device]To see IP of the device: go to the de... -
How to Install Easy Bio for ESSL x990 & K30 devices ? Install easy bio for ZKTeco, ESSL and Identix Machines (TFT) ?
EASY BIO Installation Procedure Applicable for ZKTeco, ESSL and Identix Machines (TFT) Take client on aydesk Below given steps are used for inst... -
Biometric DHCP on/ OFF ? What if IP is 0.0.0.0.0
Step 1) DHCP ONStep 2) Write IP on paper when DHCP is ONStep 3) DHCP offStep 4) Update IP (written on paper) in Device IP and Easy bio and try connect... -
Biometric Important FAQs
Biometric related our concerns:1.Can we integrate multiples devices from single software and how?Yes, easy bio 2.0 can be integrated with multiple dev...